I,
a

Ontario Power Cutters
With Hand Drive Attachment
These machines have points of excellence resulting from thirty-seven years'
specializing cutters. The advantage of this specialization is realized by the users
of Oswego-made cutters. The Ontario Power Cutters, with hand drive attach-
ient, are adapted for all classes of work. They are fast, powerful, convenient
and accurate. The high speed of cut is obtained with low speed of driving wheel,
which indicates the easy action and the small power required to drive. Each
cutter is one-half inch wider between frames than the listed size.
List Prices of Ontario Power Cutters with Hand Drive Attachment
Shipping Weight                                    liNt Price
8'-inch        1900 pounds................................$32500
:i        2000 pounds.........   .......................36000

32-Inch Oswego Automatic Clamp Cutter
Also furnished with wheel on top for clamping by hand. Clamp rises six inches.
The knife makes twenty-seven cuts a minute; production, therefore, is limited only
by the ability of th operator to keep pace with the machine.
REGULAR EQUIPMENT. Grooved
tabl front scored in inch lines with
brass rule graduated to six-
teenths; back tahle grado-
a   ated to sixteenths. Cable
gauge movement. Back
gauge in three parts;
each part may be offset
seven inches and cuts n
work up to three-quar-
ters of an inch. Start-
ing lever on left-hand side.
List Price of 32-inch Oswego Automatic Clamp Cutter with Foot
Treadle and Cable Gauge
Size    Shissing Wright                                    iAt Prise
32-inch     4500 lbs........ ...........................$57000
List Price of 32-Inch Oswego Automatic Clamp Cutter with Foot
Treadle, Cable Gauge and Hand Clamp Attachment
Sie     Shipping W ight                                    list Price
32-inch    4700  lbs...   .   .   .   .   .   .   .   .   .   .   .  .  .  .  .  .  .  .  .  . $63500
The thirty-two inch Oswego Automatic Clamp Cutters have been greatly
improved by building them on the same general lines as the regular thirty-four
a     inch, thirty-eight inch and larger Oswego Power Automatic Clamp Cutters,
which greatly increase their worth. All the Oswego Automatic Clamp Cutters
have this advantage: The heavy pressure of the automatic clamp is applied
before the instant of cutting and does not consume power during the cutor after
the cut is made. The new Oswego Automatic cuts the maximum quantity of accurate
Olsso Aumatic Clamp Catr        work and saves its purchase price in a few years for this one point alone. Other
improvements have been made in the other automatic machines shown in the Oswego
list, all tending to increase their efficiency, improve their action and minimize the
power required to drive the machines. As a matter of fact, it has been the policy of the manufacturers to sacrifice everything, such
as patterns, tools, drawings, stock and effort in order to consummate an improvement and keep the Oswego machines up to that
high standard of merit which they have enjoyed for so many years. The makers have gone ever forward with the idea that an
improvement is the most precious thing in the world and must be incorporated in their machines. This policy has been an expensive
one, but it is the best and only one in the long run.
1167

Brown & Carver Hand Clamp Power Paper Cutters
Will cut work up to three-quarters of an inch wide, and the knife rises six and one-half inches. Table is grooved to prevent
sheets wedging under gauge; or the table is plain, if desired. The table is convenient height, and is arranged for putting on two
side extensions in front for handling work before and after cut.
The hark gauge is in three parts regularly (or in two parts, or one part, if desired),
and, when split, the section forms a side gauge so that work can be cut near the
center of knife as well as at the side of the machine. The back gauge is close
to the side gauge for small work.
The knife is bolted solidly to the bar, and is instantly adjusted for level or
near by a turn of the connecting rods.
The direct crank motion to the knife-bar never allows knife to fall short
or to cut into the stick.
The clamp is balanced to run the entire distance, up or down, with
one spin of the wheel. The clamp is provided with a flat, removable
plate to prevent clamp fingers from indenting fine work.
Solid clamp and back gauge, cutting up to three and one-half
inches, are furnished to order.
Pulleys furnished regularly on side shown in cut, but can be fur-
nished on opposite side to order.
The fast screw movement for back gauge, with wheel divided to six-
teenths, is furnished regularly on cutters thirty-four inch to eighty-four
F    inch.
Quick cable movement, with indicator reading to sixteenths, will be
furnished instead of screw movement, if desired, without extra charge,
to order.
The fifty-four inch to eighty-four inch machines can be started from
either side by the bar across the front.
The power movement shown in Brown & Carver catalogue on fifty-four-
inch to eighty-four-inch machines, for operating back gauge, is furnished
to special order only (extra). This labor-saving device moves the back
gauge backward or forward by power, a lever swung to the right or left
controlling both the direction and the speed. Its indicator wheel reads the
position of the back gauge to sixteenths, and, if desired, a micrometer pointer
can be attached to read to less than thousandths.
Friction clutch, cut gears, steel shafts, brass rule, case-hardened steel
frown &Carver Hand                             bolts, iron of a durable quality.
Clams lamer PaPer Cat                              All machines subjected to a running test before leaving the works.
Illustrated catalogue free.
List Prices of Brown & Carver Hand Clamp Power Paper Cutters
Size     Shippig Wright   Liat Price     Size      Shipping Wright  lint Price      size      Shippig Weight  Liat Price
34-inch      4500 lbs.       $62500       54-inch        7800lbs. . . . . $129000   68-inch       12300lbs..     $200000
38-inch       5200lbs.        75000       57-inch        82001bs.. . . . 140000     74-inch       145001bs..      240000
11-inch    ]00,s.         95000       63-inch       10500 lbs . . . . 170000    84-inch       16000Ibs . . . . 280000
i       .nolb         115000       65-inch       11700lbs.. . . 182000

-A''
!ii

I

I                        L.

I