9.0  PROGRAM OUTPUT
9.1  Output Reports
The output from the model is divided into 2 parts.
The -first is an echo of the input which defines the system
being simulated.    The printout from the example problem
used in Section 8 is included in Appendix B. This printout
was generated from the input data shown in Appendix A. The
end of the first section of output is marked by "INPUT COM-
PLETE".   The second portion of the output is optional and
is controlled by the PRINT parameter on the second input
card.   PRINT allows output options to be selected.    PRINT
has 10 "flags" which may be set to either 1 or 0 with 1
denoting selection of that particular print option.        A
typical value for PRINT is shown by column below in which 5
print options are requested.
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
0   1   0   1   1   1   1   0    0   0
The print options selected by each column are defined
below.
1 - Reversed Array Dumps
Prints out head, bottom and material type arrays as a
check against input
2 - Array Dump Option
If the program aborts, head values are output at the
time of program failure.    However, system errors are
not trapped and output is not provided when this type
of error occurs.
3 - Head Array
Subroutine OUTPUT is called and the head matrix values
are printed   (not to scale).    This option   is used
during model calibration.

Golder Assowiates

March, 1982

-52-

786085